We all have experienced common plumbing problems at some point in our lives. Whether it’s a clogged drain, a leaky faucet, or a faulty water heater, plumbing problems can be a hassle to deal with. Fortunately, there are some simple solutions to these common plumbing issues that you can do yourself. In this blog, we’ll discuss some of the most common plumbing problems and solutions, and how can you fix yourself.

Three Common Types of Plumbing Problems and Solutions

You can also call the admiral local plumber at 905-334-2121. Get your fix clogged drains and toilets, leaky faucets and pipes, water heater issues and other emergency plumbing services.

Contact experts at Admiral local plumbers in Burlington, plumbers in Ancaster, plumbers in Oakville or the surrounding area.

Clogged Drains and Toilets

One of the most common plumbing problems that homeowners face is a clogged drain or toilet. Clogs can range from minor blockages due to the accumulation of debris, to major blockages due to tree roots, which can cause a lot of damage and frustration. There are a few solutions to help you get rid of clogs and restore full water flow.

– Use a plunger:

Plunging is a simple, effective means of dislodging stubborn clogs. For a sink or tub, you will need a cup plunger, which has a larger cup than the traditional plunger.

For a toilet, you will need a flange plunger, which has a smaller cup with a rubber flap at the bottom. Make sure to cover the overflow hole in your sink or tub before plunging. If the clog is minor, plunging should be able to dislodge it.

– Use a drain snake:

This is a tool with a flexible metal line that can be inserted into the drainpipe to manually remove the clog. Drain snakes are available in both manual and power models, but manual models are more effective for minor clogs.

– Use chemical drain cleaners:

These cleaners contain strong chemicals that can dissolve the clog and clear the clogged drains and toilets. However, it is important to be careful when using chemical drain cleaners, as they can damage your pipes and the environment.

– Low Water Pressure:

Low water pressure happens due to a clogged water line, a faulty pressure regulator, mineral buildup in your pipes, or a leak in the main water line.

The most common solution for low water pressure is to clean out your pipes. You can do this by using a plumber’s snake to clear out any debris that may be blocking the water flow. If the problem persists after cleaning, you may need to replace your pressure regulator.

If mineral buildup is the cause of your low water pressure, you can use a descaler to remove the buildup. For this, attach a descaler to the main water line and run it through your pipes.

Leaky Faucets and Pipes

Leaky faucets and pipes can be a major annoyance in any home or business. Not only do they lead to water waste, but they can also cause a great deal of damage to the surrounding area. Luckily, there are several solutions to this common plumbing issue.

The first step to fixing a leaky faucet and pipes is to determine the source of the leak. If the leak is coming from the faucet, the problem may be as simple as replacing the washer or O-ring.

If the leak is coming from a pipe, identify the pipe and then determine if the issue is a corroded pipe or a broken seal or joint.

Once the source of the leak is identified, the next step is to make the necessary repairs. For a leaking faucet, this may involve replacing the washer or O-ring, tightening the nuts and bolts, or replacing the entire faucet.

For a leaking pipe, the solution may involve replacing the corroded section of the pipe or patching the broken seal or joint.

It is also important to consider preventative measures to avoid future leaky faucets and pipes. This may include regularly checking and replacing washers, O-rings, and other components of the faucet, or inspecting the pipes for signs of corrosion.

Water Heater Issues

Common water heater issues include lack of hot water, strange noises coming from the heater, and leakage.

Such issues happen due to various factors such as sediment buildup, corrosion, and worn-out parts. Fortunately, most of these problems can be fixed with simple plumbing repairs.

  • Lack of Hot Water:

If your water heater isn’t producing hot water, the first thing to check is the thermostat. Ensure the temperature is set to the desired level and is functioning properly. If the thermostat is working, then you may need to replace the heating elements or check for a clogged dip tube.

  • Strange noises:

If your water heater is making strange noises, it could be due to sediment buildup inside the tank. To fix this, you should flush the tank and replace the anode rod.

  • Leakage:

Leaks are one of the most common water heater issues. They can be caused by a variety of factors such as worn-out gaskets, corroded pipes, or a faulty pressure relief valve.

You should replace the gaskets and/or pipes, and make sure the pressure relief valve is functioning properly. To be in the sage, call a local plumber near you.


Plumbing problems can be difficult to deal with, but there are some simple solutions that you can do yourself.

From clogged drains and toilets to water heater problems, we’ve discussed some of the most common plumbing issues and how you can fix them. If the problem persists, you can call admiral plumbing services.

Common FAQs

What are the possible causes for my loud banging sound?

The loud banging sound that you hear in your house could be a result of any number of potential causes.

It is important to start by checking the obvious things, such as pipes and faucets. If they are not the cause, then it is possible that there is a loose roof shingle or something else that could be hitting the side of your home.

You should also check for any cracks or holes in the exterior of your home, as this could be an issue with insulation or plumbing. If everything checks out and you still have no idea what’s causing the noise, then it might be time to call in a professional for help.

What Temperature Should I set My Water Heater At

Water heater temperature is a very important factor to consider when it comes to water usage and energy efficiency. The optimal water heater temperature will vary depending on the household size, the number of people in the household, and the climate.

What are some of the most common tools required to unclog a sink?

The most common tools required to unclog a sink are a plunger, an auger, and a snake.

What is the purpose of pipe dope?

The purpose of pipe dope is to provide a watertight seal between the male threads on one end and the female threads on another end of the joint.

Do you provide emergency plumbing services?

Yes, we provide 24 hr emergency plumbing services to residential and commercial areas in Oakville, Burlington, Ancaster and surrounding areas.