It is of vital importance to know the proper process of cleaning a sump pump and the frequency as well. Go through this to understand all the points you need to know, including how often should sump pump be cleaned.

What is a Sump Pump and what Purpose of this Pump?

A sump pump is a tool that lessens the possibility of water damage to the basement of a house. A sump pump pumps extra groundwater around your basement that has accumulated due to rain or spring snowmelt up and away from the structure.

How does a Sump Pump for Basement Work?


The pump is typically idle, just waiting for a call to action. The soil in the area of your home becomes oversaturated when it starts to rain heavily. Excess groundwater collects in the sump pit, which starts to fill up with water. That turns on the pump and engages the float switch on the sump pump.

For new sump pump installation, sump pump maintenance,  get in touch with experts at Admiral Plumbing.

Sump Pump Maintenance Near Me

Give us a call to book your sump pump maintenance anywhere in BurlingtonAncaster, Mississauga, Oakville, Milton, & near by.

Types of the Sump Pumps

Primary sump pumps: These yield water from sump pits and shield buildings from damage. Two types of primary pumps are:

1. Pedestal
2. Submersible

Combination Pumps: These sump pumps combine a primary pump with a battery-operated backup pump into a single unit.

Backup Pumps:  If you need them, a backup pump can provide additional security if your primary pump fails and you experience flooding.

Pumps for Sewage and Septic Systems

Effluent Pumps:  Effluent pumps use a high head and high pressure to help remove treated water from septic tanks.

Sewage Pumps: The sewage pumps don’t drain the water out of your basement; instead, they move solid waste into a septic or sewage system.

How to Clean a Sump Pump?

Before beginning, check to see if it isn’t raining or if any appliances are in the path of the sump pump basin. While you are working on the sump pump, no water must enter the area.

  1. Remove the electrical connection of the sump pump. Remove the sump pump’s draw or shut off the power source’s circuit swell. It’s dangerous to maintain a sump pump while it’s attached to a power source.
  2. Enclose the pump. Wrap the bottom of the pump with the plastic tarp or sheeting to avoid a fresh recital.
  3. Place the pump in a position where you can fluently clean both sides of it. Sanitize the pump. The pleasurable part is now.
  4. Sump pump with the theatre sock to protest off the cleaning procedure. Use the scraping tool to remove any wedged-on material after the pump has been scattered and any loose residue excluded.
  5. Clean the pump using the yard sock formerly again, and wash any last bits of residue from the pump.
  6. Clean out the check stopcock. While draining the check stopcock, have your pail near at hand. The pail will catch any water that leaks from the check stopcock. To avoid standing water in the sump hole, use the wet/ dry vacuum. This step needs no explanation.
  7. To drain the sump hole of redundant water, use your shop vac. Reattach the pump. Reconnect the sump pump and ensure that all the factors are in the sump hole before you begin drawing.
  8. Reconnect the sump pump to the powerful force, and reset the swell if turned off during step two.

How to Install a New Sump Pump?

These are the steps of the new sump pump installation.

  • Connect the check valve to the discharge pipe.
  • Get your measurements ready.
  • PVC Pipe and Adapter combined
  • Test the float and sump pump
  • Weep hole drilling
  • The pump dropped into the pit after cutting the PVC piping.
  • A discharge pipe was attached to check the valve.
  • System Testing
  • Electrical cords should be secured. Finishing Up Your System.

Sump Pump Installation - Servicing 24/7


Need Sump Pump Repair or Install Near Me? We Are Here To Help. No Hidden Fees & Reasonable Pricing. Call Your Local Admiral Plumber Today!

How often should the sump pump be cleaned?

Some sump pumps require cleaning every month. The screen or intake aperture needs cleaning up monthly if the sump pump eliminates the cleaning device water. You’ll need to physically remove a submersible pump from its pit to perform this to clean the bottom grate. Cleaning the pump will ensure that the intake is not blocked, which could harm the pump because the pump can suck small stones into the grate.

Sump pump maintenance

The sump pump and pit require upkeep once every year. You’ll tidy up each by removing the pump from the hole. Detach the power source after checking to be sure the connector and cord are still in excellent shape. Clean the grate, check the drainage pipes, clean the screen or intake opening, and reinstall the pump in the pit. Fill the hole with water to prevent it from drying out.


Making a wise choice when purchasing a sump pump requires considering various factors mentioned above, such as being aware of how to maintain it properly. You can gain a lot of advantages from a sump pump, including peace of mind. It will also impact the occupants’ health and the safety of your home or property. Get in touch with your local sump pump experts near me.